|
PRIMARY MOVER (AGRICULTURAL TRACTOR)
REQUIREMENTS.
Tractor requirement: 140 h.p. Preferably with
hydrostatic or “Vario” (Fendt) transmission,
although manual tractor with creeper box is
sufficient.
Three point linkage lift requirement: 7500Kg.
Hydraulic spool requirement: 3 (min.) spools
@200Bar pressure & 80l/min flow.
Power take off requirement: 125h.p. P.T.O.
output at 540/750/1000r.p.m.
DRIVE TRAIN.
Agricultural Cat. 2 & Cat 3 linkage compatible,
1 ¾” Z20 tractor P.T.O. shear bolt coupling,
inclusive of shear bolt coupling balancing,
“80 V” series P.T.O. input shaft,
Slip & over run clutch,
Reverser gearbox 1: 1 ratio,
“80 V” series P.T.O. shaft from
reverser box to epicylic bevel box,
Epicyclic/bevel box 11.06: 1 ratio,
Heavy duty splined drive wheel shaft & tail
bearing unit, shimmed clamp collar set,
2200mm diameter x 15mm thick digging wheel with
weight saving cut outs,
8 piece digging wheel segments 135mm x 20mm (O/A
wheel diameter: 2400mm)
fitted with 96 “Pengo Kenametal” tips,
Available in 135mm cutting width to lay a 100mm
(4”) diameter pipe
Giving a max. trenching depth of 1000mm using
vertical mast height control
|
